Grado de implementación de las prácticas del sistema técnico de administración esbelta en la industria maquiladora de manufactura de México

Main Article Content

Jesús Arturo Chávez Pineda

Resumen

La adopción adecuada de la administración esbelta ofrece grandes beneficios a las compañías pues implica un cambio de filosofía de administración y de cultura organizacional, además conlleva la implementación de un sistema socio-técnico coherente con sus principios. El objetivo de la presente investigación fue analizar el grado de implementación de 13 prácticas del sistema técnico de administración esbelta en la industria maquiladora de manufactura en México; ello, con respecto al tipo de industria, tamaño de planta y tiempo de adopción de las mismas. Tales prácticas técnicas fueron seleccionadas a partir de la casa del sistema de producción Toyota. Los resultados indican que, a partir de una muestra de 222 plantas de manufactura de industrias como la eléctrica/electrónica, automotriz, aeroespacial, médica, entre otras, y las pruebas estadísticas de muestras independientes de Krustal Wallis y Mann Whitney, que el grado de implementación de las prácticas del sistema técnico de administración esbelta no presentan diferencias estadísticamente significativas por industria. No obstante, sí existen diferencias estadísticamente significativas con respecto al tamaño de planta y al tiempo de adopción de dichas prácticas. 

Article Details

Como citar
CHÁVEZ PINEDA, Jesús Arturo. Grado de implementación de las prácticas del sistema técnico de administración esbelta en la industria maquiladora de manufactura de México. RECAI Revista de Estudios en Contaduría, Administración e Informática, [S.l.], p. 41 - 68, abr. 2021. ISSN 2007-5278. Disponible en: <https://recai.uaemex.mx/article/view/15295>. Fecha de acceso: 30 jun. 2022 doi: https://doi.org/10.36677/recai.v10i28.15295.
Sección
Artículos de Investigación

Citas

Abdallah, A.B. (2013). The influence of “soft” and “hard” total quality management (TQM) practices on total productive maintenance (TPM) in Jordanian manufacturing companies. International Journal of Business and Management, 8(21), 1-13. DOI: https://doi.org/10.5539/ijbm.v8n21p1

Abdallah, A. Dahiyat, S., & Matsui, Y. (2019). Lean research and innovation performance. Management Research Review, 41(2), 239-262. DOI: https://doi.org/10.1108/MRR-10-2017-0363

Abreu-Ledón, R., Luján-García, D., Garrido-Vega, P., & Escobar-Pérez, B. (2018). A meta-analytic study of the impact of Lean Production on business performance. International Journal of Production Economics, 200, 83-102. DOI: https://doi.org/10.1016/j.ijpe.2018.03.015

Achanga, P., Shehab, E., Roy, R. & Nelder, G. (2006), “Critical success factors for lean implementation within SME’s”, Journal of Manufacturing Technology Management, 17 (4), 460-471. DOI: https://doi.org/10.1108/17410380610662889

Ahmad, M. Zakuan, N., Zuraidah, R.M., Rasi, R., & Hisyamudin, M. (2015). Mediator Effect of TPM between TQM and Business Performance in Malaysia Automotive Industry. IPO Conference Series: Materials Science and Engineering, 83(1), 5-12. DOI: https://doi.org/10.1088/1757-899X/83/1/012015

Ahronson, (2014). Lean Transformation Case Study in the Medical Device Industry. Disponible en: http://tefen.com/uploads/insights/1456223653_r2uIdpsIDy.pdf.

Angelis, J., Conti, R., Cooper, C., & Gill, C. (2011). Building a high‐commitment lean culture. Journal of Manufacturing Technology Management, 22(5), 569-586. DOI: https://doi.org/10.1108/17410381111134446

Abolhassani, A., Layfield, K., & Gopalakrishnan, B. (2016). Lean and US manufacturing industry: popularity of practices and implementation barriers. International Journal of Productivity and Performance Management, 65 (7), 875-897. DOI: https://doi.org/10.1108/IJPPM-10-2014-0157

Azuan, S. & Syed, A. (2013). Culture and lean manufacturing: Towards a holistic framework. Australian Journal of Basic and Applied Sciences, 7(1), 334-338.

Bashin, S. (2015). Lean Management Beyond Manufacturing: A Holistic Approach. New York: Springer.

Bhasin, S., & Burcher, P. (2006). Lean viewed as a philosophy. Journal of Manufacturing Technology Management, 17(1), 56-72. DOI https://doi.org/10.1108/17410380610639506.

Blanchard, D. (2007). Census of U.S. Manufacturers - Lean Green and Low Cost. Disponible en: https://www.industryweek.com/leadership/companies-executives/article/21936547/census-of-us-manufacturers-lean-green-and-low-cost Consultado el 17/03/2020

Bortolotti, T., Boscari, S., & Danese, P. (2015). Successful lean implementation: Organizational culture and soft lean practices. International Journal of Production Economics, 160, 182-201. DOI https://doi.org/10.1016/j.ijpe.2014.10.013

Bozdogan K. (2010). Evolution of the Lean Enterprise System: Critical Synthesis and Agenda for the Future. ESD Working paper series. 1-26. Center for technology, Policy and Industrial Development. Massachusetts Institute of Technology Disponible en: https://dspace.mit.edu/handle/1721.1/102814 Consultado el 10/03/2020

Buttha, M.K.S., Egilmez, G., Chatha, K.A & Huq, F. (2017). Survey of lean management practices in Pakistani industrial sectors. International Journal of Services and Operations Management, 28(3), 309-344. DOI: https://doi.org/10.1504/IJSOM.2017.087287.

Chen, Z. (2015). The relationships among JIT, TQM and production operations performance. Business Process Management Journal, 21(5), 1015-1039. DOI: https://doi.org/10.1108/09727981111175957

Cherns, A. (1976). The principles of sociotechnical design. Human Relations, 29(8), 783–792. DOI: https://doi.org/10.1177/001872677602900806

Cardon, N. & Bribiescas F. (2015). Respect for people the forgotten principle in Lean manufacturing implementation. European Scientific Journal, 11(13), 45-61.

Calvo-Mora, A., Ruiz-Moreno, C.,Picón-Beryojo, A. & Cauzo-Bottala, L. (2014). Mediaton Effect of TQM technical factors in excellence management systems. Journal of Business Research, 67(2014), 769-774. DOI: https://doi.org/ 10.1016/j.jbusres.2013.11.042

Cua, K., McKone, K., & Schroeder, R. (2001). Relationships between implementation of TQM, JIT, and TPM and manufacturing performance. Journal of Operations Management, 19(6), 675-69. DOI: https://doi.org/10.1016/S0272-6963(01)00066-3

Cutcher-Gershenfeld, J. (2003). Lean Transformation in the U.S. Aerospace Industry: Appreciating Interdependent Social and Technical Systems. Working paper series. Massachusetts Institute of Technology, engineering systems división. Center for technology, Policy and Industrial Development, MIT. Disponible en: https://dspace.mit.edu/handle/1721.1/102911 Consultado el 20/03/2020

Dal Pont, G., Furlan, A., & Vinelli, A. (2008). Interrelationships among lean bundles and their effects on operational performance. Operations Management Research, 1(2), 150-158. DOI: https://doi.org/ 10.1007/s12063-008-0010-2


Dave, Y., & Sohani, N. (2019). Improving productivity through Lean practices in central India-based manufacturing industries. International Journal of Lean Six Sigma, 10(2), 601-621. DOI: https://doi.org/10.1108/IJLSS-10-2017-0115

Doolen, T. & Hacker, M. (2005). A review of Lean assessment in organizations: an exploratory study of Lean practices by electronic manufacturers. Journal of Manufacturing Systems, 24(1), 55-67. DOI: https://doi.org/10.1016/S0278-6125(05)80007-X

Emiliani, M., & Stec, D. (2005). Leaders lost in transformation. Leadership & Organization Development Journal, 26(5), 370-387. DOI: https://doi.org/10.1108/01437730510607862

Furlan, A., Vinelli, A., & Pont, D.G. (2011). Complementarity and lean manufacturing bundles: an empirical analysis. International Journal of Operations & Production Management, 31(8), 835-850. DOI: https://doi.org/10.1108/01443571111153067

Fotopoulos, B.C., & Psomas, L.E. (2009). The impact of “soft” and “hard” TQM elements on quality management results. International Journal of Quality and Reliability Management, 26(2), 150-163. DOI: https://doi.org/10.1108/02656710910928798

Gadenne, D., & Sharma, B. (2009). An investigation of the hard and soft quality management factors of Australian SMEs and their association with firm performance. International Journal of Quality and Reliability Management, 26(9), 865-880. DOI:https://doi.org/10.1108/02656710910995064

Gaiardelli, P., Resta, B., & Dotti, S. (2019). Exploring the role of human factors in lean management. International Journal of Lean Six Sigma, 10(1), 339-366. DOI:https://doi.org/10.1108/IJLSS-08-2017-0094

García Alcaraz, J., Maldonado, A., Iniesta, A., Robles, G., & Hernández, G. (2014). A systematic review/survey for JIT implementation: Mexican maquiladoras as case study. Computers in Industry, 65(4), 761-773. DOI: https://doi.org/10.1016/j.compind.2014.02.013

García, S. & Dolan, S (1997). La Dirección por Valores. Madrid: McGraw Hill.

Ghosh, M. (2012). Lean manufacturing performance in Indian manufacturing plants. Journal of Manufacturing Technology Management, 24(1), 113-122. DOI: https://doi.org/10.1108/17410381311287517.

Herron, C. & Braiden, P.M. (2007). Defining the Foundation of Lean Manufacturing in the Context of its Origins (Japan). Conference on Agile Manufacturing, Durham. DOI: https.doi.org/10.1049/cp:20070021

Hernández, J. C. & Vizán-Idoipe, M. A. (2013). Lean Manufacturing: Concepto, Técnicas e Implantación. Madrid: Escuela de Organización Industrial.

Hines, P. & Butterworth, C. (2019). The Essence of Excelence: Creating a Culture of Continuous Improvement. UK: S A Partners.

Hines,P., Found, P., Grifitts, G., & Harrison, R. (2008). Staying Lean. Lean Enterprise Research Centre. Cardiff University. Disponible en https://orca.cf.ac.uk/52764/1/stayinglean.pdf

Hines, P., Holweg, M., & Rich, N. (2004). Learning to evolve A review of contemporary lean thinking. International Journal of Operations & Production Management, 24(10), 994-1011. DOI: https://doi.org/10.1108/01443570410558049

Hu, Q., Mason, R., Williams, S., & Found, P. (2015). Lean implementation within SMEs: a literature review. Journal of Manufacturing Technology Management, 26(7), 980-1012. DOI: https://doi.org/10.1108/JMTM-02-2014-0013

Jasti, N., & Kodali, R. (2016). An empirical study for implementation of lean principles in Indian manufacturing industry. Benchmarking: An International Journal, 23(1), 183-207. DOI: https://doi.org/10.1108/BIJ-11-2013-0101

Kannan, V., & K. Tan, (2005). Just in time, total quality management, and supply chain management: understanding their linkages and impact on business performance. Omega 33(2), 153-162. DOI: https://doi.org/10.1016/j.omega.2004.03.012

Karlsson, C., & Åhlström, P. (1996). Assessing changes towards lean production. International Journal of Operations & Production Management, 16(2), 24-41. DOI: https://doi.org/10.1108/01443579610109820

Konecny, P., & Thun, J. (2011). Do it separately or simultaneously—An empirical analysis of a conjoint implementation of TQM and TPM on plant performance. International Journal of Production Economics, 133(2), 496-507. DOI: https://doi.org/10.1016/j.ijpe.2010.12.009

Krafcik, J. 1988. Triumph of the lean production system. Sloan Management Review, 30 (1), 51-52.

Kumar, R. & Kumar, V. (2016). Effect of lean manufacturing on organizational performance of Indian industry: a survey. International Journal of Productivity and Quality Management, 17(3), 380-393. DOI https://doi.org/10.1504/IJPQM.2016.074856

Lander, E. & Liker, J.K. (2007). The Toyota production system and art: Making highly customized and creative products the Toyota way. International Journal of Production Research, 45 (16), 3681-3698. DOI https://doi.org/10.1080/00207540701223519

Larman, C. & Vodde, B. (2009). Lean Primer. Disponible en: http://www.leanprimer.com/downloads/lean_primer.pdf Consultado 15/03/2020

Liker, J. (2004). The Toyota Way. New York:MacGraw-Hill

Liker, J. & Meier, D. (2006). The Toyota Way Fieldbook. New York:MacGraw-Hill
.
Liker, J., & Rother, M. 2011. Why Lean Programs Fail. Lean Enterprise Institute. 1–5. Disponible en: https://www.lean.org/Search/Documents/352.pdf Consultado el 28/02/2020.

Lucato, C.W., Calarge, A.F., Junior, L.M., & Calado, D.R. (2014). Performance evaluation of lean manufacturing implementation in Brazil. International Journal of Productivity and Performance Management, 63(5), 529-549. DOI: https://doi.org/10.1108/IJPPM-04-2013-0085

Marksberry, P. (2012). The Modern Theory of the Toyota Production System: A Systems Inquiry of the World’s Most Emulated and Profitable Management System. Boca Raton, FL: CRC Press

Matsui, Y. (2007). An Empirical Analysis of Just-In-Time Production in Japanese Manufacturing Companies. International Journal of Production Economics. 108, 153–164. DOI https://doi.org/10.1016/j.ijpe.2006.12.035

MacDuffie, J.P. (1995). Human resource bundles and manufacturing performance: Organizational logic and flexible production systems in the world auto industry. Industrial of Labor Relations Review, 48, (2), 197-221. DOI: https://doi.org/10.2307/2524483

McKone, K., Schroeder, R., & Cua, K. (2001). The impact of total productive maintenance practices on manufacturing performance. Journal of Operations Management, 19(1), 39-58. DOI:https://doi.org/10.1016/S0272-6963(00)00030-9

Mogdil, S. & Sharma, S. (2016). Total productive maintenance, Total quality management and operational performance: An empirical study of Indian Pharmaceutical industry. Journal of Quality in Maintenance Engineering, 22(4), 353-377. DOI: https://doi.org/ 10.1108/JQME-10-2015-0048

Monden, Y. (1994). Toyota Production System. An integrated Approach to Just in Time. New York: Springer

Monge, C., Cruz, J. & Lopez, F. (2013). Impacto de la manufactura esbelta, manufactura sustentable y mejora continua en la eficiencia operacional y responsabilidad ambiental en México. Información Tecnológica, 24 (4), 15-32. DOI https://doi.org/10.4067/S0718-07642013000400003.

Nawanir, G., Teong, K.L., & Othman, N.S. (2013). Impact of lean practices on operations performance and business performance Some evidence from Indonesian manufacturing companies. Journal of Manufacturing Technology Management, 24(7), 1019-1050. DOI: https://doi.org/doi:10.1108/JMTM-03-2012-0027

Netland T.H & Ferdows, K. (2016). The S-curve effect of lean implementation. Production and Operations Management, 25 (6), 1106-1120. DOI: https://doi.org/10.1111/poms12539

Nordin, N., Deros, B.,Wahab, D., & Rahman, M. (2012) A framework for organizational change management in lean manufacturing implementation. International Journal of Services and Operations Management, 12(1), 101-117. https://doi.org//10.1504/IJSOM.2012.046676.

North America Manufacturing Benchmarks & Outlook, 2007. The MPI Group. Disponible en: http://www-03.ibm.com/marketing/edocument/industrial/lgh_eas_manufacturing_kit/document/print/print.pdf Consultado el 20/03/2020.

Ohno, T. (1988). The Toyota Production System: Beyond Large Scale Production. Portland OR: Productivity press.

Parkes, A. (2015). Lean Management Genesis. Management, 19(2), 106-121. DOI: https://doi.org/10.1515/manment-2015-0017

Pay, R. (2008). Everybody’s jumping on the lean bandwagon, but many are being taken for a ride. Industry Week, May 2008. Disponible en: http://www.industryweek.com/companies-amp-executives/everybodys-jumping-lean-bandwagon-many-are-being-taken-ride Consultado el 22/03/2020

Piña, R., León B.J., & Preciado R.J. (2018). Nivel de implementación de manufactura esbelta en la industria maquiladora de Hermosillo y Guaymas-Empalme, Sonora. RECAI Revista de estudios en Contaduría, Administración e Informática, 7(20), 36-51.

Prabhushankar, G.V., Kruthika, K.,Pramanik, Souradeep, Kadadevaramath, J. & Rajeshwar S. (2015). Lean manufacturing system implementation in Indian automotive components manufacturing sector - an empirical study. International Journal of Business and Systems Research, 9(2), 179-194. https://doi.org/10.1504/IJBSR.2015.069442


Psomas, E., & Antony, J. (2019). Research gaps in Lean manufacturing: a systematic literature review. International Journal of Quality and Reliability Management, 36(5), 815-839. DOI: https://doi.org/10.1108/IJQRM-12-2017-0260

Psomas, E., Vouzas, F., & Kafetzopoulos, D. (2014). Quality management benefits through the “soft” and “hard” aspect of TQM in food companies. The TQM Journal, 26(5), 431-444. DOI: http://doi.org/10.1108/TQM-02-2013-0017

Rahman, S., & Bullock, P. (2005). Soft TQM, hard TQM, and organizational performance relationships: an empirical investigation. Omega, 33(1), 73-83. DOI:https://doi.org/10.1016/j.omega.2004.03.008

Saleh, A.R. & Sweis, R.J (2017). The relationship between soft and hard total quality management practices and operational performance in Jordanian manufacturing organizations. International Journal of Concepts and Philosophy, 10(4), 345-377. DOI: https://doi.org/10.1504/IJMCP.2017.10007596

Salhieh, L., & Abdallah, A. (2019). A two-way causal chain between lean management practices and lean values. International Journal of Productivity and Performance Management, 68(5), 997-1016. DOI: https://doi.org/10.1108/IJPPM-08-2018-0289

Sahoo, S., & Yadav, S. (2018). Lean production practices and bundles: a comparative analysis. International Journal of Lean Six Sigma, 9(3), 374-398. DOI: https://doi.org/10.1108/IJLSS-01-2017-0002

Sahoo, S. (2019). Lean manufacturing practices and performance: the role of social and technical factors. International Journal of Quality & Reliability Management, 37(5), 732-754. DOI: https://doi.org/10.1108/IJQRM-03-2019-0099

Samson, D., & Terziovski, M. (1999). The relationship between total quality management practices and operational performance. Journal of Operations Management, 17(4), 393-409. DOI:https://doi.org/10.1016/S0272-6963(98)00046-1

Seddon, J. & Caulkin, S. (2008). Systems thinking. Lean production and action Learning. Action Learning Research and Practice, 4, 9-24. DOI: https://doi.org/10.1080/14767330701231438

Seitz, T. (2003). Lean Enterprise Integration: A New Framework for Small Businesses. Tesis de maestria. Massachusetts Institute of Technology, Cambridge M.A. Disponible en: https://dspace.mit.edu/bitstream/handle/1721.1/82700/53344822-MIT.pdf;sequence=2 Consultado el 21/03/2020.


Setianto, P. & Haddud, A. (2016). A maturity assessment of lean development practices in manufacturing industry. International Journal of Advanced Operations Management, 8(4), 294-322. DOI: https://doi.org/10.1504/IJAOM.2016.084150

Schein, E. (1988). La Cultura Empresarial y el Liderazgo. Una Visión Dinámica. México: Plaza & Janes Editores.

Schonberger, R. J. (2007). Japanese production management: An evolution—With mixed success. Journal of Operations Management, 25(2), 403-419. DOI:https://doi.org/10.1016/j.jom.2006.04.003


Shah, R., & Ward, P. (2003). Lean manufacturing: Context, practice bundles, and performance. Journal of Operations Management, 21(2), 129-149. DOI: https://doi.org/10.1016/S0272-6963(02)00108-0

Shah, R., & Ward, P. (2007). Defining and developing measures of lean production. Journal of Operations Management, 25(4), 785-805. DOI: https://doi.org/10.1016/j.jom.2007.01.019

Shook, J. (2010). How to change a culture: Lessons from NUMMI. Sloan Management Review, 51(2), 1-10.

Sisson, J., & Elshennawy, A. (2015). Achieving success with Lean. International Journal of Lean Six Sigma, 6(3), 263-280.DOI: https://doi.org/10.1108/IJLSS-07-2014-0024

Singh, G., & Ahuja, I. (2015). An evaluation of just-in-time initiatives in the Indian industries. International Journal of Quality & Reliability Management, 32(6), 559-588. DOI: https://doi.org/10.1108/IJQRM-07-2013-0109

Solaimani, S., Veen, J., Sobek II, D., Gulyaz, E., & Venugopal, V. (2019). On the application of Lean principles and practices to innovation management. The TQM Journal, 31(6), 1064-1092. DOI:https://doi.org/10.1108/TQM-12-2018-0208

Spear, S.& Bowen, K. (1999). Decoding the DNA of the Toyota Production System. Harvard Business Review, 77(5), 96-106.

Suarez, F (1994). La competitividad de las empresas. Evolución, imperativos estratégicos y características de la organización exitosa de hoy. Estudios Públicos, 54 (4), 1-10.

Taj, S., & Morosan, C. (2011). The impact of lean operations on the Chinese manufacturing performance. Journal of Manufacturing Technology Management, 22(2), 223-240. DOI: https://doi.org/10.1108/IJQRM-07-2013-010910.1108/17410381111102234

Trist, E.L. & Bamforth, K.W..(1951), Some social and psychological consequences of the long-wall method of coal-getting. Human Relations, 4, 3–38. DOI: https://doi.org/10.1177/001872675100400101

Wickramasinghe, G., & Wickramasinghe, V. (2017). Implementation of lean production practices and manufacturing performance. Journal of Manufacturing Technology Management, 28(4), 531-550. DOI https://doi.org/10.1108/JMTM-08-2016-0112

Womack, J.P., Jones, D.T., & Roos, D. (1990). The Machine that Changed the World. New York: Free Press.

Womack J. & Jones D. (1996). Lean Thinking: Banish Waste and Create Wealth in your Corporation. New York: Free Press.

Yadav, V., Jain, R., Mittal, M., Panwar, A., & Lyons, A. (2019). The impact of lean practices on the operational performance of SMEs in India. Industrial Management & Data Systems, 119(2), 317-330. https://doi.org/10.1108/IMDS-02-2018-0088

Yang, C., Yeh, T., & Yang, K. (2012). The implementation of technical practices and human factors of the Toyota production system in different industries. Human Factors and Ergonomics in Manufacturing & Service Industries, 22(6), 541-555. DOI: https://doi.org/10.1002/hfm.20296

Yunis, M., Jung, J., & Chen, S. (2013). TQM, strategy, and performance: a firm‐level analysis. International Journal of Quality & Reliability Management, 30(6), 690-714. DOI: https://doi.org/10.1108/02656711311325638